Cat. 5e RJ45 Tool-Less Type Keystone Jack

    Model NO.: GL-1011
    Trademark: OEM
    Origin: China
    HS Code: 8517709000
    Model NO.: GL-1011
    Trademark: OEM
    Origin: China
    HS Code: 8517709000

    Cat. 5e RJ45 Tool-Less Type Keystone Jack
    Cat. 5e RJ45 Keystone Jack (tooless)
    1. Housing material: PC UL94V-0
    2. Insert material: Flame retardancy ABS UL94V-0
    3. PCB material: FR-4 T=1.6MM
    4. Contact material: Phosphor bronze stamp pin T=0.35mm
    5. IDC contact material: Phospor broze T=0.5mm Nickel plating
    6. Wire: AWG 22~26

    Specifications:
    Meet TIA/EIA-568-A and TIA/EIA-568-B Category 5E requirements.
    Meet TIA/EIA TSB-40
    Meet ISO/IEC Generic Cabling Standard 11801
    Meet CENELEC Generic Cabling Standard EN50173
    Angle: 90 Degree
    Termination: 110- Krone-Dual type
    Electrical:
    According to UL 1863
    Current rating: 1.5 Amp Max.
    Voltage rating: 150 Volts
    Contact resistance: 20 m-ohm
    Insulation Resistance: 500M-ohm
    Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min
    Materials:
    Housing: PC UL94V-0
    IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.
    PCB: FR4 1.6mm(0.04") thickness, 2 layers
    Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area
    Cat. 5e RJ45 Tool-Less Type Keystone Jack
    Cat. 5e RJ45 Keystone Jack (tooless)
    1. Housing material: PC UL94V-0
    2. Insert material: Flame retardancy ABS UL94V-0
    3. PCB material: FR-4 T=1.6MM
    4. Contact material: Phosphor bronze stamp pin T=0.35mm
    5. IDC contact material: Phospor broze T=0.5mm Nickel plating
    6. Wire: AWG 22~26

    Specifications:
    Meet TIA/EIA-568-A and TIA/EIA-568-B Category 5E requirements.
    Meet TIA/EIA TSB-40
    Meet ISO/IEC Generic Cabling Standard 11801
    Meet CENELEC Generic Cabling Standard EN50173
    Angle: 90 Degree
    Termination: 110- Krone-Dual type
    Electrical:
    According to UL 1863
    Current rating: 1.5 Amp Max.
    Voltage rating: 150 Volts
    Contact resistance: 20 m-ohm
    Insulation Resistance: 500M-ohm
    Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min
    Materials:
    Housing: PC UL94V-0
    IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.
    PCB: FR4 1.6mm(0.04") thickness, 2 layers
    Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area

    Ejector Header Connector

    Ejector Header Connector,Ejector Header Smt Connector,Ejector Header Right Angle Connector,Ejector Header Straight Connector

    Dongguan Yangyue Metal Technology Co., Ltd , https://www.yyconnector.com

    Previous Post: Porcelain Post Spool Insulators
    Next Post: 24kv Fuse Cut-out Porlymer
    Home
    Recent Posts
    • Copper Flexible Cable (Wire) Flat Cable PVC Insu…
    • Prices of 30m 600W LED Flood High Mast Lighting …
    • How to set the parameters of serial communicatio…
    • Cortex-M series processor introduction and its c…
    • LED G4 Lamp Tower Type/12V/3W/260lm/Ce/RoHS/Warm…
    • Universal Garage Door RF Car Remote Starter Cont…
    • LEDs 60W-180W Industrial LED Factory High Bay Li…
    • 433.92MHz Remote Control for Car Door Lock with …
    • Rechargeable LED Electric Fly Swatter with USB C…
    • Hot Sale China Phone Repair Parts for Tenco Phan…
    • What is an MCU, and what is the difference betwe…
    • Extension Mini Retractable Cable Reel with Korea…
    • China-Sii-Power-Cords-with-Molded-Plug
    • 7W 9W 12W LED Bulb Light Rechargeable LED Lamp
    • 15W Recessed Ceiling COB LED Down Light
    • 400 Pairs Jelly Filled Hyac Outdoor Water Proof …
    • 1.2m T5 Fuorscent Tube Light Bracket with CE
    • STP Series 36V10000A High Power DC Rectifier
    • 220kv Electric Power Transmission Galvanized Ste…
    • 0.6/1kv, 3.6/6kv PVC Insulated Power Cable