Yesterday morning, Pingyuan County held a signing ceremony for the R&D and production investment project of the South China LED chip production and research base, Nantaishan New Energy Green Ecological Technology Pioneer Park, which marked that the county's rare earth industry will enter the rare earth development from the mining and separation stage. Application phase. The county party committee secretary Xiao Wenhao, the county magistrate Zhang Yingping and the investor Shenzhen Qindexin Technology Development Co., Ltd. Chairman Su Delong attended the ceremony.
It is understood that the project was jointly invested by Mo Rong Investment Co., Ltd. and Shenzhen Qindexin Technology Development Co., Ltd., and settled in the third phase of Pingyuan Ecological Industrial Park with a total investment of 3.6 billion yuan. This is the project with the largest investment, the highest scientific and technological content and the most promising development since the county attracted investment. The project will focus on the largest LED chip production target in South China, and it is planned to be completed in three phases in five phases. The first phase of investment is 400 million yuan, covering an area of ​​400 mu. It mainly produces 2 inch, 4 inch and 6 inch LED epitaxial wafers. After completion, it can realize an annual output value of 6 billion yuan and a profit and tax of 3.5 billion yuan. It will give the county a resource advantage and develop. Strategic emerging industries have played a positive role in accelerating the rise of a green economy.
Waterproof Vertical Mount D-Sub Connectors
waterproof D-sub system is IP67 rated. These panel-mount connectors are available in solder cup as well as right angle and vertical PCB mount types. The cable-mount connector kit includes the connector, which has solder cup contacts. These connectors are available in 9-, 15-, and 25-positions in standard density and 15-, 26-, and 44-positions in high density. The recommended wire gauge for the solder cup connector is 22 AWG to 26 AWG.
These panel-mount waterproof D-subs are designed for rear-mount applications in panels that are up to 2.0 mm thick. They come with two sets of jackscrews. One jackscrew set is 5 mm long for panel thickness up to 1.2 mm, and the other is 6 mm long for panel thicknesses from 1.2 mm to 2.0 mm.
Cable mount D-sub connector kits come with the backshell, seal, thumbscrews, and solder cup connector. They are also easy to install. Simply fit the cable through the backshell, terminate the wire to the solder cup contacts, and hand tighten the cable nut on the rear of the backshell. The backshell will seal a particular range of cable diameters depending on the position count of the connector. Consult the datasheet for specific cable diameter ranges.
Specifications
Current rating
Standard D-sub: 5 A
Hi-density D-sub: 2 A
Breakdown voltage: ≥ AC 500 V/1 minute
Insulation resistance: ≥ 500 MΩ @ DC 500 V
Contact resistance: ≤ 20 mΩ
Material
Contacts: copper alloy, gold-plated
Connector body: nylon 9T or PBT, UL Recognized
Shell: steel, nickel-plated
Applications
DV camcorder
DV VTR
Non-linear editing system
Broadcast monitor
Betacam deck
Panel Mount Waterproof D-Sub Connectors:
Water Proof D-Sub, Standard Density, Male, Panel Mount
Water Proof D-Sub, Standard Density, Female, Panel Mount
Water Proof D-Sub, Standard Density, Female, PCB Mount
Waterproof solder cup, stamped & formed contact D-sub waterproof
solder cup,machined contacts D-sub waterproof
Vertical Mount Waterproof D-Sub Connectors:
Combo Power + Signal D-Sub Connector, Vertical Mount, Pluge Type,
right angle D-sub waterproof
IP67 rated Combo power D-sub waterproof
Standard Density, Waterproof Vertical Mount D-Sub Connectors, High Density Waterproof Vertical Mount D-Sub Connectors,IP67 D-Sub Connectors Vertical Mount,Board Mount Waterproof Vertical Mount D-Sub Connectors
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkwire.com