1 four-line LED light with a total of four wires, three rows of lights (note that not four rows of lights ~ ~), each row of 1 meter 24 lights, 24 * 3 = 72. Since the power of each lamp bead is 0.05W, the power of the 72-bead LED lamp strip is: 72*0.05=3.6W.
2 four-wire LED lamp has a bandwidth of about 22mm, a thickness of about 8mm, and a weight of about 0.25kg/m (4m-kilogram).
3 Each LED light strip must be equipped with a special plug (plug with transformer); when connecting, it is necessary to remove the clear plastic cover, and then cover the test light. Can not be directly connected with a cover, so easy to short circuit!
4 There is a "hinged" mark per meter, which can only be cut at the mark, and the wrong one or the cut will cause one meter to be off! Some will be biased by the sign, it is best to carefully look at the status of the sign before the cut, according to the local cut off the center can not be connected. You can see it with care.
When the 5 LED lamp is installed, it is usually placed in the lamp socket, and it can be straightened. It can also be fixed with a string or a thin wire. If you need to install the exterior or the vertical, you need to buy the clip and the tail plug. The original clamp is fully illuminating. It is best to put a waterproof glass glue on the tail plug and the plug after the installation, so that the waterproof function is better.
JP Recessed Tabletop Socket be with Japanese type plug,could be selected to be with USB ports,Internet ports,Phone ports,overload protection and with or without switch.
JP Power Outlet can be set into furniture and office furniture like table,cabinet and so on.It will be easily to use the charging for Phone and home appliance.
Specifically, We have our own design and production team for USB Circuit Board design and produce.
JP Recessed Tabletop Socket
Power Plug Socket,JP Recessed Tabletop Socket,JP ConceaLEDMounted Socket,Japan Flush Mounting Sockets
Dongguan baiyou electronic co.,ltd , https://www.dgbaiyou.com