Artesyn's new 200W DC/DC power converter for telecom equipment and computing systems can play up to 94.

Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin

MOS power IC full range

GW MB10F 0.8A 1000V rectifier bridge

Astra Health Science and Technology (Artesyn Embedded Technologies) announced the launch of a series suitable for telecom and network equipment and efficiency up to 94.5% of the new DC / DC power converters. The new AVO200 power converter currently on display at the 14th Electronica Shanghai 2015 is a 200W fully-regulated 1/8-brick DC/DC power module, the latest two models offering 12V And 5V output voltage to meet the power requirements of most communication systems, ideal for small, high-current, low-voltage, and cost-effective systems, including wireless, fiber or access network systems, or servers and computing systems .

The AVO200 series of power converters are designed for an extremely wide 36V to 75V (DC) input voltage range, which is the standard input voltage range commonly used in telecommunications equipment. The 12V model can output up to 16.7A, while the 5V model has an output current of up to 40A. This family of power converters offers exceptional heat dissipation from -40 to 85 degrees Celsius and is available in an open or substrate design that allows engineers to use either conductive or forced air cooling.

The new AVO200 series of power converters from Artesyn have many special advantages, including lower ripple and noise, fixed switching frequency, high capacitive load, pre-bias startup and remote compensation of output voltage. The function is therefore easier to integrate into the system design and makes the project easier to deploy. Each version is equipped with a through-hole termination. The two new converters feature a special protection design to prevent overcurrent, overheating and overvoltage conditions. The primary side of the converter features an enable pin and the secondary side features remote compensation and output voltage regulation. These converters are available in an industry-standard 1/8-brick power module package size and pin configuration. Open modules are only 58.4 x 22.9 x 9.6 mm (2.3 x 0.9 x 0.378 in), while the base module The size is only 58.4 x 22.9 x 12.7 (ie 2.3 x 0.9 x 0.5 inches).

Astra Health Technology posted a product page in its new multi-frame display AVO200 series DC / DC power converter of high-definition pictures, people can download.