Â
Â
We have over 15 years experience of manufacturing High Mast Lights. We are one of THREEmanufacturers that own AIRPORT EQUIPMENT CERTIFICATION in China. You can find our high mast lights in tens of airports in China, and they are also installed in Kenya Airport, Bangladesh airport and etc.
Â
Products Details
Â
Height |
From 18 m to 50m |
Suit for |
Airport ,seaport,plaza,stadium ,square,highway station,street way ,etc |
Shape |
round or polygon |
Material |
Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 |
Torrance of dimension |
+- 2% |
Lighting Source |
400 W- 5000 W high pressure sodium flood light,light extension :up to 30 000 m² |
Light plate |
Various figure of selection ,material with hot dip galvanization steel frame |
Lifting system |
Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute Equipped e;antiferromagnetism brake and break -proof device,manual operation applied under power cut |
Electric appliance control device |
Electric appliance box to be be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode |
Surface treatment |
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
Joint of Poles |
Insert mode,innerflange mode,face to face joint mode . |
Design of pole |
Against earthquake of 8 grade |
Wind Speed |
80 Km/Hour |
Welding |
We has past flaw testing.Internal and external double welding makes the welding in shape |
Thickness |
6 mm to 20 mm |
Production Process |
Raw material test→Cutting→Molding or bending →Welding (longitudinal )→Dimension verify→Flangewelding→Hole drilling→Calibration→Deburr→Galvanization or powder coating ,painting→Recalibration→Thread→Packages |
Packages |
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required |
Â
Â
APPLICATIONS
Â
|
Plaza High Mast Lighting Airport High Mast Lighting Highway High Mast Lighting Storage-yard High Mast Lighting Industrial-plant High Mast Lighting |
Park High Mast Lighting Dock High Mast Lighting Stadiums High Mast Lighting Overpass High Mast Lighting Toll-station High Mast Lighting Â
|
Production Process
Raw material testCuttingMolding or bending Welding (longitudinal ) Dimension verifyFlangeweldingHole drilling Calibration Deburr Galvanization or powder coating, PaintingRecalibrationThreadPackaging
Packages
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client requiredÂ
Lifting system
Latch barrel with inner mounting bracket locker is mounted to an underside of the mast-top pulley assembly. Furthermore, all steel cables are not exposed and more effectively protected.
Latching mechanism latched on steering arms is able to release strain on steel cables when in the operation position. The process of latching on and off is stable and without vibration.
The bumper is designed on the luminary mounting bracket for avoiding direct damage between mast-top assembly and the raising luminary mounting bracket.
The leveling device for luminary support bracket is easy to operate and convenient to adjust level.
Special designed red-flag indicator has obvious visual effects and reflects actual situation of latching operation.
 Testing
Â
Packages:
Bulb wrappings for high mast lighting poles, individual cartons for lamps and controlling equipments, etc. A 40' HP loads 7-20M/ 6-25M/ 5-30M/ 4-35M high mast lights.
Our projects
Â
Lead Time
20 days on receipt of payment for 10 high mast light poles
Payment Terms
30% in advance and 70% before shipment for our products
Â
Â
We have over 15 years experience of manufacturing High Mast Lights. We are one of THREEmanufacturers that own AIRPORT EQUIPMENT CERTIFICATION in China. You can find our high mast lights in tens of airports in China, and they are also installed in Kenya Airport, Bangladesh airport and etc.
Â
Products Details
Â
Height |
From 18 m to 50m |
Suit for |
Airport ,seaport,plaza,stadium ,square,highway station,street way ,etc |
Shape |
round or polygon |
Material |
Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 |
Torrance of dimension |
+- 2% |
Lighting Source |
400 W- 5000 W high pressure sodium flood light,light extension :up to 30 000 m² |
Light plate |
Various figure of selection ,material with hot dip galvanization steel frame |
Lifting system |
Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute Equipped e;antiferromagnetism brake and break -proof device,manual operation applied under power cut |
Electric appliance control device |
Electric appliance box to be be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode |
Surface treatment |
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
Joint of Poles |
Insert mode,innerflange mode,face to face joint mode . |
Design of pole |
Against earthquake of 8 grade |
Wind Speed |
80 Km/Hour |
Welding |
We has past flaw testing.Internal and external double welding makes the welding in shape |
Thickness |
6 mm to 20 mm |
Production Process |
Raw material test→Cutting→Molding or bending →Welding (longitudinal )→Dimension verify→Flangewelding→Hole drilling→Calibration→Deburr→Galvanization or powder coating ,painting→Recalibration→Thread→Packages |
Packages |
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required |
Â
Â
APPLICATIONS
Â
|
Plaza High Mast Lighting Airport High Mast Lighting Highway High Mast Lighting Storage-yard High Mast Lighting Industrial-plant High Mast Lighting |
Park High Mast Lighting Dock High Mast Lighting Stadiums High Mast Lighting Overpass High Mast Lighting Toll-station High Mast Lighting Â
|
Production Process
Raw material testCuttingMolding or bending Welding (longitudinal ) Dimension verifyFlangeweldingHole drilling Calibration Deburr Galvanization or powder coating, PaintingRecalibrationThreadPackaging
Packages
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client requiredÂ
Lifting system
Latch barrel with inner mounting bracket locker is mounted to an underside of the mast-top pulley assembly. Furthermore, all steel cables are not exposed and more effectively protected.
Latching mechanism latched on steering arms is able to release strain on steel cables when in the operation position. The process of latching on and off is stable and without vibration.
The bumper is designed on the luminary mounting bracket for avoiding direct damage between mast-top assembly and the raising luminary mounting bracket.
The leveling device for luminary support bracket is easy to operate and convenient to adjust level.
Special designed red-flag indicator has obvious visual effects and reflects actual situation of latching operation.
 Testing
Â
Packages:
Bulb wrappings for high mast lighting poles, individual cartons for lamps and controlling equipments, etc. A 40' HP loads 7-20M/ 6-25M/ 5-30M/ 4-35M high mast lights.
Our projects
Â
Lead Time
20 days on receipt of payment for 10 high mast light poles
Payment Terms
30% in advance and 70% before shipment for our products
ZGAR Aurora 2500 Puffs
ZGAR electronic cigarette uses high-tech R&D, food grade disposable pod device and high-quality raw material. All package designs are Original IP. Our designer team is from Hong Kong. We have very high requirements for product quality, flavors taste and packaging design. The E-liquid is imported, materials are food grade, and assembly plant is medical-grade dust-free workshops.
Our products include disposable e-cigarettes, rechargeable e-cigarettes, rechargreable disposable vape pen, and various of flavors of cigarette cartridges. From 600puffs to 5000puffs, ZGAR bar Disposable offer high-tech R&D, E-cigarette improves battery capacity, We offer various of flavors and support customization. And printing designs can be customized. We have our own professional team and competitive quotations for any OEM or ODM works.
We supply OEM rechargeable disposable vape pen,OEM disposable electronic cigarette,ODM disposable vape pen,ODM disposable electronic cigarette,OEM/ODM vape pen e-cigarette,OEM/ODM atomizer device.
Aurora 2500 Puffs,ZGAR Aurora 2500 Puffs Pod System Vape,ZGAR Aurora 2500 Puffs Pos Systems Touch Screen,ZGAR Aurora 2500 Puffs Disposable Vape Pod System,2500Puffs Pod Vape System
ZGAR INTERNATIONAL(HK)CO., LIMITED , https://www.zgarpods.com