Low-Voltage Switchgear and Controlgear Assemblies

      GGD low-voltage fixed switchgear is widely used in power plants, substations, factories, mining enterprises, high-rise buildings and other powers users. It is designed in line with the principles of safety, economy, rationality and reliability. In the power distribution system with ac 50Hz, rated operating voltage 380V and rated current up to 3150A, it is used for power conversion, distribution, control of power distribution equipment and power lighting and capacitance compensation.
      GGD meets the standards of GB7251.12(Low-voltage Switchgear and Controlgear Assemblies - Part 2: Power Switchgear and Controlgear Assemblies), IEC60439-1(2)(Low-voltage Switchgear and Controlgear Assemblies - Part 1: Type-tested and Partially type-tested Assemblies ) and IEC60529(Degrees of Protection Provided by Enclosures).
 

PoE Splitter

The POE splitter is opposite to the POE power supply. POE power supply combines data signal and power, so POE power supply is also called POE combiner. The working process of the POE splitter is just the opposite, which separates the data signal from the power. If data terminals such as network cameras (IPC), wireless APs, and IP phones support POE power supply, you do not need to use a POE splitter when wiring, and you can directly supply power via a network cable. The POE splitter is mainly used for PSE devices such as POE switches and POE power supplies at the upper end, but the devices connected to the lower end do not support POE. The POE splitter separates the power supply into data signal and power. There are two output lines, one is the power output line, and the other is the network data signal output line, that is, the ordinary network cable. The power output has 5V/9/12V, etc., which can match various DC input non-POE power receiving terminals, and supports the IEEE 802.3af/802.3at standard. The data signal output line, that is, the ordinary network cable, can be directly connected to the network port of the non-POE power receiving terminal.

The POE splitter is used in conjunction with PSE power supply equipment to supply power to network equipment such as wireless APs, wireless routers, IP cameras, and IP phones in a network environment that lacks a power cord or is far from a power outlet. In many monitoring occasions, the best location for monitoring may not be very convenient for equipment to obtain power. The emergence of POE splitters facilitates the integration of equipment that does not support POE power supply into the POE network, and the monitoring equipment does not have to sacrifice the most to take care of the distance of the socket. Optimal installation location.

Poe Splitter,Poe Isolator,Output Poe Splitter,Scodeno Poe Splitter

Shenzhen Scodeno Technology Co.,Ltd , https://www.scodenonet.com