DVD burner can burn and not read discs

    DVD burner can burn and not read discs

    1. Perhaps after the system is installed with Nero, the CD burning function of Windows is disabled.

    Click Start to run, enter services.msc, open the service, double-click the IMAPI CD-Burning COM Service service, change the startup type to automatic, and restart.

    2. Open My Computer, open the drive properties of the recorder, in the Burn tab, check Enable CD recording on this device.

    In addition, if the burner and hard disk use the same data cable, or install two burner \ optical drive, the above problems will also occur. It is recommended to use a separate data cable for the recorder and hard disk. If it is a dual burner, because Windows can only open "Desktop CD Recording" for one of them, and the other is in a non-opening state, (you said, it is a dual optical drive, obviously it is your old optical drive as a burner Put in the burning disc in the non-opening recorder, Nero will not be activated automatically, double-click to enter will prompt that the function is incorrect, as long as you select "Enable CD recording on this device" on the recorder, you can say The problem should be a hardware problem. First of all, can you be sure that you can't read the DVD, because you have to wait for a long time, and if it's not time, you can't wait.
    And are you sure you are a DVD burner? The CD burner may be a CD burner.

    How many times do you use to burn, it is recommended to use 4-6X speed burning. If there is any problem with the speed around 4X, it is estimated that the optical drive needs to be repaired more likely.


    Reinstall the system and driver, basically solve the problem

    JoyLED provides ultra slim & light Led Display panel - 70mm thick LED display panel with a weight of 12kg/14kg pushes itself to the limit, which saves cost of supporting structure and transportation. Module, power supply, sending card, receiving card of JoyLED display is with convenient maintenance, which can all be maintained from the front,and front-accessible design reduces module replacement time down to 5-6s. There`s no need of catwalk for the LED indoor fixed display. A catwalk free solution is achieved by the realization of thorough front installation. JoyLED display provides excellent display effect - 1920Hz high refresh rate, uniform color and 160° super wide viewing angle all guarantee an ultimate visual experience.

    Indoor Fixed Led Display

    Indoor Fixed LED Display

    Small Led Display,Glass Led Display,Glass Curtain Led Display,Led Fixed Indoor Display

    Shenzhen Joy LED Display Co., Ltd. , https://www.joe-led.com

    Previous Post: Analysis of YAMAHA DSP-A1 AV amplifier
    Next Post: None
    Home
    Recent Posts
    • Manual directional valve and motorized direction…
    • Sisvel LTE will advance intellectual property ri…
    • Quantenna launches 4x4 MIMO wireless video bridg…
    • RFID tag antenna based on tie knot Sierpinski fr…
    • Test principle and application of power amplifie…
    • MAXQ1103 Destructive Reset Diagnostic Procedure
    • Ultrasonic humidifier (ultrasonic atomizer) circ…
    • Discussion on Design Scheme of 35 kV Digital Sub…
    • How to join MSN group?
    • Transmission medium
    • Typical processing of digital TV
    • The difference between bridge and router
    • VOD
    • Color television signal
    • TV spectrum and channels
    • TV basics
    • Smart antenna technology in mobile communication…
    • ADSL and HUB
    • Layer 4 switching
    • What is a bridge?