Mention the headset settings, if set, it will obviously enhance the listening effect, of course, you need to be familiar with the meaning of various parameter settings, such as "playback gain control" many friends do not know what is the use, in fact, it is the volume of the dynamic control audio, The “reproduction gain effect intensity†represents the speed at which the volume is amplified or attenuated. The weaker the slower the speed, the closer the final volume is to the original audio volume, and the stronger the opposite. So in order to avoid playback distortion, it is recommended to set it to medium effect.
I have to mention another parameter related to it - "maximum gain multiplier", which means that when the volume of the audio we play is too small, the playback gain will automatically amplify the volume multiplier in order to enlarge the volume to the medium level we have previously set. However, if the magnification is too large, the noise inside the song will be enlarged. In order to ensure the best playback effect, it is recommended to set it to 4 times. As for the "maximum volume", it is easier to understand. It represents the maximum decibel value of the sound from the playback gain. The larger the value, the louder the volume, and the 0 decibel represents the maximum value of the digital signal. In order to make the music we hear more Soft, not harsh "noise", it is recommended that you set it to -1.9 decibels.
EQ setting: I believe everyone is more clear about the EQ setting. The "FIR equalizer" here is actually connected with the principle. In order to get a better voice experience, it is best to choose to open. It is recommended to select several equalizers that have been preset in the program. The effect, if you feel that the elasticity of a certain order is not enough, you can adjust it manually by the graphic equalizer, because everyone's listening habits are different, so you should refer to your preferences when setting.
Surrounding the field: As for "field surround", it is a challenge to the sound field effect. Although the resolution of the good headphones is very good, it is always unsatisfactory in the performance of the sound field. With the V4 sound effect, we can properly optimize the headphones in the sound field. In the performance, the greater the surround strength of the field, the more obvious the stereoscopic effect of the sound. In order not to lose the original features of the sound, I still recommend that you set the intensity to medium.
Another thing that can't be ignored is the “central intensity controlâ€, which has a great influence on the performance of the central vocal. The stronger the intensity, the clearer the vocals, and the more the vocals will be, the better the vocal will be. Therefore, it is recommended that you adjust the “central intensity†to medium. . As for "digital reverberation", it is actually using a digital method to simulate an environment, so that we can get the effect of listening to music in a special environment while listening to music, but it is recommended that you do not open it, and there is not much effect on the improvement of sound quality.
Dynamic effect: One setting that I find very useful is that the V4 sound also provides a "dynamic effect" that can control the bass and treble limits. If it is a user who likes the bass, it can be adjusted in the "dynamic bass control". The average level of the bass, the stronger the bass effect, the better it is set to 3390. If you want to feel the bass, you can adjust it properly.
Digital limit level: The last setting of the earphone is “limit levelâ€, 0 dB is the maximum value of the digital signal. The smaller the value is, the smaller the volume is, the more the sound details will be lost, but the volume of the final output can be effectively controlled, so it is recommended. You can set the "restriction level" to 0 decibels.
24V Battery Pack ,Large Battery Pack,24 V Battery Pack,24V Lithium Ion Battery Pack
Zhejiang Casnovo Materials Co., Ltd. , https://www.casnovonewenergy.com