Music commuter sets - wireless noise reduction headphones SONY Sony MDR-1000X + a30

    Reasons to purchase

    I do not want to toss the old, combined with the convenience of a variety of wireless devices, send a new one.

    The 1000X is said to incorporate various new features.

    The first place is comfort. Do not wear uncomfortable. Do not have a large amount of low-frequency, large amount of direct headache do not.

    You are extremely valuable in your time, so you only pick one that is important.

    Sony Premium Noise Cancelling, Bluetooth Headphone, Black (MDR1000X/B) $398 US Amazon Direct Link



    Appearance Gallery

    1. The first one is more important, indicating that it was a new lot at the beginning of the year and it is hoped that the old lot will not be encountered. 20170105 production.

    2. The second sheet is on the side of the box. It is recommended that the knife be lightly stroked along the middle gap when unpacking. This way, the inner box can be withdrawn directly from the side without damaging the top warranty card.

    Pull out the inner box

    3. Try nfc pairing, half-second match. Pairing win10 and 6sp is also fast, but...there is a "but".

    Win10 pairing

    Use experience and precautions

    1. First degree of comfort, not to feel uncomfortable, recent non-in-ear: hd598, y50bt, B&W P7, t50p, 9500, s500 and others.

    1000x continuous wear for 3 hours without pain, without any sense of discomfort; wearing glasses under the condition of the temples without any pressure or internal pressure external pressure pain. explain:

    A. (1000x, P7), there is an upward force component. Because the P7 is a square sheepskin earmuffs, resulting in hard and strong pressure, it takes a long time to adjust the effect of offsetting the upward component of the collet (provided 5-10 minutes from time to time if skilled). 1000x don't need to adjust.

    B. (hd598, y50bt, t50p, etc.) is the head above the temples. The smaller the earmuffs are, the smaller the clips are, and finally the glasses legs are clipped directly - what I said was the collet torture tool t50p.

    C. (9500) is not black, but it is boastful. It means no pressure, but it also loves it.


    2. Listening sense: Win10 default aptx, wireless conditions than the cable to be bright, sound more solid condensation; wired connection to the computer case, the sound is a bit recessed (regardless of whether the headset is turned on at this time). A30 is set to "LDAC sound quality priority" The code rate is slightly lower, and there is no difference with the wired connection.

    The female voice is more appealing to me.

    3. Remember to use your own settings before you actually use noise reduction. There is a slight audible difference between the settings and the default noise reduction levels. After wireless mode is turned off, there is a little unsightly noise. The wireless mode activates noise reduction with slight audible white noise.

    4 pairing speed is very fast, but unfortunately Apple and the computer does not have a corresponding nfc, only according to the instructions on the "press the power button in the off state for 7 seconds" (actually 7.5-9 seconds, until you hear the "Bluetooth connection" and indicator changes ) Pairing operation. If you frequently operate, it is a waste of time.

    5. The legendary Creaking noise. Personally think that there is no lubrication at the shaft, and the resulting rotation of the shaft during chin activity; the actual impact is not significant. Head-fi was proposed to be solved with silicon lubricant. We convey the discussion of seniors here, thank you.

    6. other details of advantages and disadvantages:

    Details: 1. Pay attention to the operation of the right ear cap gesture when compared with the earphone for horizontal or vertical operation. Simply speaking, the ear cap should be operated horizontally. 2. It is recommended to use a desiccant.

    Advantages: 1. The function button is in the left ear cover and can be operated blindly. 2. In the open state, press the power button to voice the remaining power.

    Disadvantages: 1. In-machine voice prompts are too loud. 2. Slightly more odor out of the box. 3.usb cables and aviation plugs are cheaper; the cords are very soft (I do not know what line, OFC?) 4. as shown.

    to sum up

    BOSE is right. It seems that when you were lying down and making money, it's no longer. It's estimated that it will be less profitable for consumer-grade headsets.

    I wish you a happy New Year.

    Programmable sound chip

    Customer Diy Sound Modules, Programmable Sound Chip, Sound Module with Customer Sound

    AST Industry Co.,LTD , https://www.astsoundchip.com

    Previous Post: Zhang Chen: Artificial Intelligence Landing is Critical in Application Scenarios and Technologies
    Next Post: "Internet + Robot" will completely shuffle the six major industries!
    Home
    Recent Posts
    • Against the sky, the graphene battery kills all …
    • Commonly used MCU module circuit sharing (mainly…
    • Chinese regulators require Apple to strengthen i…
    • ASUS RT-AC66U B1 wireless router out of the box …
    • 360 degree panoramic image parking system fully …
    • Hisense TV series ULED TV wins CITE2017 Gold Awa…
    • Foshan Lighting 180 million yuan to acquire 32.8…
    • The new version of the hundred yuan printing pro…
    • Who can master the core discourse right in sever…
    • Exquisite single-chip non-blocking delay program…
    • Chongqing City Outer City Investment Company to …
    • 899 can buy dual camera thousand yuan flagship p…
    • Grayscale White Balance Tuning for Private Home …
    • GPS is used to determine the attitude and relati…
    • Sweeping robot into the new blue ocean "pat…
    • "Nine lives," smart TV free resources,…
    • These precision tests escort new energy vehicles
    • NetEase cloud music into the headset market inve…
    • Qualcomm Snapdragon 835VR Glasses Prototype Expe…
    • Tesla once again increased the density of the ch…