Router ipv6 set method _ipv6 router settings tutorial

**IPv6 Configuration Method** IPv6 (Internet Protocol Version 6) is a next-generation IP protocol designed by the IETF (Internet Engineering Task Force) to replace the current version of the IP protocol, IPv4. As IPv4 addresses are rapidly running out, IPv6 is expected to become the standard for future internet addressing. Compared to IPv4, IPv6 offers a vastly larger address space, using 128-bit addresses instead of 32-bit ones. This allows for an almost unlimited number of unique IP addresses. The following guide explains how to configure IPv6 on your system. **Tools/Requirements** - A computer with IPv6 support - Internet connection **Step-by-Step IPv6 Setup** 1. **Install IPv6 Protocol** Open the Control Panel, go to "Network and Internet" > "Network Connections". Right-click on "Local Area Connection", select "Properties", then click "Install". Choose "Protocol" and add IPv6. Once installed, you should see it listed in the network settings.  2. **Configure IPv6 Address Manually** In the same "Properties" window, double-click "Internet Protocol Version 6 (TCP/IPv6)". Select "Use the following IPv6 address" and enter a valid IPv6 address. For testing purposes, you can use a sample like `3FFE:FFFF:7654:FEDA:1245:BA98:3210:4562`.  3. **Test IPv6 Configuration** Press `Win + R`, type `cmd`, and run `ipconfig` to check your IPv6 configuration. You should see the IPv6 address listed.  4. **Verify IPv6 Connectivity** Open a browser and visit `http://ipv6.jmu.edu.cn/`. If you see a dancing tiger, it means you're accessing the site via IPv6. Otherwise, you're still using IPv4.  **Common Router IPv6 Configuration** In dormitories or labs, usually only one IP address is provided, but multiple devices need to connect. To overcome this, routers can be configured to support IPv6. However, most standard routers do not support IPv6 natively. The solution involves setting up a "server" machine that runs a virtual router, while other devices act as "clients." Here’s how: 1. **Install IPv6 on All Machines** On Windows XP, open Command Prompt and type `ipv6 install`. For Windows Vista and later, make sure "Internet Protocol Version 6 (TCP/IPv6)" is enabled in the network settings.  2. **Modify the Router** Log into the router’s admin panel (e.g., TP-LINK TL-R402 at `192.168.1.1`). Disable the DHCP server, restore factory settings, and reconfigure the WAN port to LAN. This effectively turns the router into a switch.  3. **Set Up the Host (Server)** Assign a static IP to the host machine (e.g., `211.*.*.59`). Install AnyRouter software and configure it to act as a server. Set the external network card and specify the school-assigned IP.  4. **Configure Clients (Extensions)** On each client device, set the IP address to match the host's first three segments, incrementing the last segment. Set the default gateway and DNS to the host’s IP address. Ensure the host remains online for clients to access the network.  This method allows multiple devices to share a single IPv6 address, making it ideal for dormitory or lab environments where bandwidth limitations are a concern.

Solder Bar

Solder Wire/bar is an indispensable material for the manufacture of electronic products .Tin wire,TIn bar and tin paste are the most widely used electronic welding materials,the technical level depends on the performance of solder joints and welding process performance.

Product specification: Ñ„12*330mm

295*20*13mm

Product Features:

Smooth surface,neat coiling,beautiful appearance,uniform distribution of additives,good continuity.

Less splash of additives in welding process,good mobility,good wettability,less smoke,less oxide slag,bright welding spots.

Widely used in a variety of wave slidering and manual welding of television,audio capacitors,circuit boadrds and communications equipment.

Including SnCu.SnAg.SnAgCu,SnAgCuSb.SnAgBi series.

Solder Bar,Solder Wire Bar,Silver Solder Bar,Lead-Free Tin Solder Bar

Shaoxing Tianlong Tin Materials Co.,Ltd. , https://www.tianlongspray.com