One. LED production process
1. Process:
a) Cleaning: Ultrasonic cleaning of the PCB or LED holder and drying.
b) Mounting: After the silver electrode is placed on the bottom electrode of the LED die (large wafer), the expansion is performed, and the expanded die (large wafer) is placed on the thorn crystal table, and the die is pressed with a stylus under the microscope. One by one is mounted on the corresponding pad of the PCB or LED holder, and then sintered to cure the silver paste.
c) Pressure welding: The electrode is connected to the LED die by an aluminum wire or gold wire bonding machine for the current injection lead. The LED is directly mounted on the PCB, and an aluminum wire welder is generally used. (Making a white light TOP-LED requires a gold wire welder)
d) Packaging: The LED dies and bonding wires are protected with epoxy by dispensing. Dispensing on the PCB, there are strict requirements on the shape of the gel after curing, which is directly related to the brightness of the backlight product. This process will also take on the task of a point phosphor (white LED).
e) Soldering: If the backlight is an SMD-LED or other packaged LED, the LED needs to be soldered to the PCB before the assembly process.
f) Film cutting: Various diffusion films, reflective films, and the like required for backlighting are punched by a punch.
g) Assembly: Manually install the various materials of the backlight in the correct position according to the drawings.
h) Test: Check whether the photoelectric parameters of the backlight and the uniformity of light output are good.
i) Packaging: The finished product is packaged and put into storage as required.
two. Packaging process
(1). The task of LED packaging
The external lead is connected to the electrode of the LED chip, and the LED chip is protected, and the light extraction efficiency is improved. The key processes are racking, pressure welding and packaging.
(2). LED package form
LED package form can be said to be varied, mainly according to different applications, the corresponding size, heat dissipation measures and light-emitting effects. LEDs are classified into Lamp-LED, TOP-LED, Side-LED, SMD-LED, High-Power-LED, etc. in package form.
(3). LED packaging process
(4). Package process description
Chip inspection
Microscopic examination:
Whether there is mechanical damage on the surface of the material and pitting
Whether the chip size and electrode size meet the process requirements
Is the electrode pattern intact?
2. Expansion
Since the LED chip is still arranged with a small close spacing (about 0.1 mm) after dicing, it is not conducive to the operation of the post process. We use a film expander to expand the film of the bonded chip, and the distance between the LED chips is stretched to about 0.6 mm. It is also possible to use manual expansion, but it is easy to cause problems such as chip waste and waste.
3. Dispensing
Place silver glue or insulating glue on the corresponding position of the LED bracket.
(For GaAs, SiC conductive substrates, red, yellow, and yellow-green chips with back electrodes, silver paste is used. For blue and green LED chips of sapphire insulated substrates, insulating paste is used to fix the chips.)
The difficulty of the process lies in the control of the amount of glue, and there are detailed technical requirements in the height of the glue and the position of the glue.
Since silver glue and insulating glue have strict requirements in storage and use, the wake-up, stirring and use time of silver glue are all matters that must be paid attention to in the process.
4. Preparation glue
In contrast to dispensing, the glue is applied to the back electrode of the LED with a glue machine, and then the LED with silver glue on the back is mounted on the LED holder. The efficiency of the preparation of glue is much higher than that of dispensing, but not all products are suitable for the preparation process.
5. Hand-piercing
The expanded LED chip (with or without glue) is placed on the fixture of the lancet table, and the LED bracket is placed under the clamp, and the LED chips are punctured one by one under the microscope with the needle. Hand-made thorns have an advantage over automatic loading, making it easy to replace different chips at any time, for products that require multiple chips.
6. Automatic loading
The automatic loading is actually a combination of two steps of glue (dispensing) and mounting the chip. First, put silver glue (insulating glue) on the LED bracket, then use the vacuum nozzle to suck the LED chip to the moving position, and then place it in the The corresponding bracket position.
In the process of automatic loading, it is mainly necessary to be familiar with the operation and programming of the equipment, and at the same time to adjust the glue and installation accuracy of the equipment. In the selection of the nozzle, the bakelite nozzle should be used as much as possible to prevent damage to the surface of the LED chip. In particular, the blue and green chips must be bakelite. Because the steel nozzle will scratch the current diffusion layer on the surface of the chip.
Deluxe Rice Cooker was one of electric type rice cooker , but it`s the most popular type of electric rice cooker . especially famous in Southeast Asia area with its good appearances with various functions. Not only its outer shell could be customized with different demands, but also it speeding cooking , saving times and electricity, enhancing our lifestyle
Features
The inner pot is made of solid and durable aluminum alloy of high intensity , such as non-stick inner pot , stainless steel inner pot and honeycomb patterned inner pot with non-stick coating.
There are some models that use stainless steel instead of aluminium .Various other materials, such as copper, pure carbon, ceramic, and diamond powder coating, may be used for higher heat conductivity or better taste.
Applications
Multifunction , can cooking rice, soup and much more. added cooking versatility with supplied steam tray.
Some rice cookers have settings for congee, a type of rice porridge called okayu in Japanese, Juk in Korea, and zhou in Chinese.
More elaborate recipes are possible using a rice cooker, and there are cookbooks devoted entirely to dishes prepared using a rice cooker. It is possible to cook soups, stews or sponge cakes in electric rice cookers. By simply adding ingredients and setting it to "warm", a rice cooker cooks the contents at about 65 °C (150 °F). In a few hours, the stew is fully cooked and ready to eat.
Deluxe Rice Cooker
Deluxe Rice Cooker,Cylinder Rice Cooker,Mini Rice Cooker,Stainless Steel Rice Cooker
Guangzhou Taipeng Electrical Appliances Technology CO., LTD. , https://www.taipengelectrics.com