Careless father puts his son into the washing machine

For washing safety, washing machines have a variety of safety settings. Judging from the incidents in which injuries occurred to washing machines, most of them were caused by naughty ignorance, and the accident in the video did indicate that a grown-up dad was plagued with carelessness.

In the video, the young father put the child in the washing machine and closed the washing machine door. Unexpectedly, the washing machine slowly started to work, and the power cut was called off in time to avoid the tragedy. In addition to this kind of teaser, in fact, people often have a situation where the washing machine is not operating properly. Here is a wake-up call.

1. Do not carry appliances while you work. When the household appliances are recharged, they must be removed, especially household appliances such as fans and washing machines, which can easily be injured by the rotating motor. If you must move, turn off the switch and unplug it.

2. Ask a professional to repair the appliance. If there is a breakdown in your home's electrical appliances, don't go to barefoot to repair live lines or equipment in your home. If you know a little about maintenance skills, wear shoes and wear insulated gloves.

3. Electric appliances frequently used in summer, such as electric showers, table fans, washing machines, etc., must take some practical measures to prevent electric shock, such as the frequent use of electric pen to test whether the metal shell is charged, and install electric shock protectors (earth leakage switches).

4. If water is inadvertently soaked in your home, you should first turn off the power, that is, pull off the main switch or fuse in the home to prevent accidents caused by the submersion or insulation damage of the household appliances being used. After the power is turned off, the appliance is moved to a place where it is not soaked, and the insulation is prevented from being oxidized by moisture and affecting the future use. If the electrical equipment is submerged, there is a high possibility that the insulation will be wet. Before using it again, the insulation resistance of the equipment should be tested using a dedicated rocker. If it meets the requirements, it can be used, otherwise the insulation must be dried until the insulation is good.