Energy-saving lamps may not save energy


    According to relevant data from the China Lighting Association, the energy consumption of energy-saving lamps is only about 20% of incandescent bulbs. However, in contrast to the "energy-saving" characteristics of energy-saving lamps, the current energy-saving lamps on the market still make consumers more "energy-consuming", and the quality of the products is mixed.

    The latest news from the State Administration for Industry and Commerce once again put the energy-saving lamps on the "black list" - according to the quality monitoring of energy-saving lamps in the circulation areas of Beijing, Shanghai and Guangzhou according to the SAIC, the results show that the quality of energy-saving lamps and Not optimistic, the pass rate is only 39.3%. According to reports, of the 61 sets of energy-saving lamps that were sampled, only 24 groups were qualified. The main problems found in the monitoring include harmonic current limit, prevention of electric shock, mechanical strength and other items that do not meet the national mandatory standards.

    Just over a year ago, the Hangzhou Industrial and Commercial Bureau conducted a spot check on the energy-saving lamps in the Hangzhou market, and found that the pass rate was only 20%. Among the 10 batches of products examined, 8 batches of products with lamp power, color rendering index, color tolerance, initial luminous efficacy/light flux and other indicators do not meet the national mandatory standards.

    The pass rate is so reassuring, how can consumers buy qualified products? Professionals pointed out that consumers can judge whether the purchased energy-saving lamps are qualified by "visual inspection". The object of the visual inspection is the "display index" among them.

    “The level of the index displayed in the energy-saving lamp directly reflects the color rendering of the light. The higher the color rendering index of light, the more the color of the object under its illumination can be truly reflected. Otherwise, the object will be made Color distortion." Experts said, we can light the lamp, shine on the palm of your hand, the palm of your hand looks ruddy and bloody, indicating that the color rendering index of this product is high, and if the color rendering index is low, the palm is blue, no color.



    1

    Aspire

    Aspire Vape pen, Manufacture Aspire Vaporizer, Aspire Vape pod

    Shenzhen Xcool Vapor Technology Co.,Ltd , http://www.xcoolvapor.com

    Previous Post: Anwar High-Tech listed 0.45mm thick chip LED for car
    Next Post: Philips sown 592 million euros to acquire LED manufacturers
    Home
    Recent Posts
    • Delta Lighting: Accumulation of strength and unw…
    • Hong Kong New World Building Christmas Lights pl…
    • Submillimeter wave integrated horn antenna based…
    • Using gradient mean method to improve APC resolu…
    • China promotes energy-saving lamps and is funded…
    • Hung Pai Lighting Lighting Xu Xiaohong talks abo…
    • Tianjin solar street lights save 50,000 degrees …
    • Intelligent daylighting system
    • Ma Ying-jeou intends to loosen Taiwan’s semico…
    • XiTlight passes impact testing
    • Electronic Water Pressure Control Switch
    • Brodrick comments on LED Energy Star situation
    • Interview with NVC Wu Changjiang: Doing National…
    • High-performance Microscan products enable full …
    • The tax threshold is set to be implemented from …
    • Power grid construction first passed the "e…
    • Delay switch circuit designed by LM431
    • Delay switch circuit designed by LM431
    • Liu Xiang master and apprentice to the bird'…
    • Quanzhou TV DLP large screen background wall sys…